Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
The Thule Xadapt 2 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid or Xsporter load bars. Please contact us with any questions regarding compatibility.
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
RockyMounts' 9mm Clutch is a fork-mount rack for bikes with 9mm quick-release front axles. Bolt the 9mm Clutch to your truck bed, van, trailer, or SUV for the ultimate bike hauler to carry your bike everywhere you go.
$25.95 - $29.00
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm thru-axle, and you're all set.
- Powdercoated steel body with 9mm skewer & hole in handle for padlock
If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.
Delta's pre-aligned positioning bike hitch allows for easy fork installation. It features special anti-rust treatment with a tough powder-coat finish. This ultra-rigid 9mm skewer allows you to easily carry your front wheel with a Delta Wheel Hitch or Wheel Holder (each sold separately). - Pre-aligned positioning for easier fork installation - Special anti-rust treatment with tough powder-coat finish - Features patented Delta locking lever - Base Dimensions 4" x 1.5" x 1.75" - Mounting Holes 3" center to center - Ultra-rigid 9mm skewer - Carry your front wheel with a Delta Wheel Hitch (sold separately)
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).
- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish
A fork hitch for bike transportation that allows for versitle mounting options on any flat surface. - Pre-aligned positioning for easier fork installation - Remove Boost 15 x 110mm insert to accommodate 20mm axles - Easy mounting to any flat surface - Rust-free Aluminum construction - The platform is 3.75 x 1.5" and the holes are 3" center to center Compatible with following: 15 x 110 mm (Boost, silver insert) 15 x 135 mm (Borealis, Fatback, 9zero7 + other Fat Bike forks) 15 x 142 mm (Salsa + others) 15 x 150 mm (Rock Shox Bluto Fork + others) 20 x 110 mm
Secure an additional bike to your Saris Kool Rack 2-Bike (sold separately) with the Kool Rack Add-On. Each Add-On fits one bike and the Kool Rack can fit 2 additional bikes so you can carry a total of 4 bikes on all of your adventures.
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
Easy to mount and a cinch to store in the back of your car, Saris’ Solo is a low-profile rack for peace-of-mind convenience. Solo’s uni-body frame has no adjustable parts, which makes it a no-brainer to set up. With its soft, rubber, pivoting feet and four hold-down straps, the Solo safely and securely attaches to your car. Two strong buckles and an integrated anti-sway strap keep your bike in place. As an added bonus, the Solo is built with 100% recyclable, non-rusting materials.
Saris' Traps Wheel Holder mounts easily to your Saris Single or Triple Track (each sold separately) to keep your front wheel secured. It accepts the wheel with little or no quick-release adjustment. Mounting hardware is included.
Hit the road today with Saris’ Sentinel 2-Bike rack—it’s ready to go right out of the box, easy to mount, and securely holds two bikes. The frame adjusts to the contours of your car and folds down flat for simple storage. To protect your car and provide a solid mount, the four hold-down straps have coated hooks, while the legs are foam-padded. Stiff ratcheting straps ensure a firm grasp on your bikes.
Saris’ Sentinel 3-Bike rack is ready to go right out of the box, easy to mount, and, thanks to its narrow arm spread, securely holds three bikes. The frame adjusts to the contours of your car and folds down flat for simple storage. To protect your car and provide a solid mount, the six hold-down straps have coated hooks, while the legs are foam-padded. Stiff ratcheting straps ensure a firm grasp on your bikes.
Add Saris' Freedom Long Wheelbase Bar to your Saris Freedom rack (sold separately) to carry an extra long wheelbase bicycle like a tandem or recumbent. The rack holds two bikes of up to 35 pounds each, and the Long Wheelbase Bar holds a bike that measures up to 57 inches axle to axle.
Taking your bikes with you has never been easier thanks to Saris' T-Rax! This great rack features anti-sway bars so bikes won't bump each other and rubber hold-down straps to safely secure the bikes. It accepts almost all bicycles, including women's, kids' and most models with non-traditional frames. The rugged 2.5-inch steel tubing reduces flex to eliminate wobbles. The arms even fold down and out of the way when not in use. Plus, the entire rack tilts away from the vehicle so you can easily reach the cargo area.
Having enough room for another bike is rarely an issue with Saris' Traps Triple Track. Simply lay it on the floor of your SUV or place it in your truck bed and add your choice of attachments. Your bikes are guaranteed a stable ride. The unique design allows bikes to be staggered or angled for hauling more bikes in a compact space. Fork mounts and wheel holders are sold individually to let you customize your Triple Track.
RockyMounts' TieRod is a fantastically simple and elegant option for attaching a fork mount roof rack to your vehicle's factory crossbars. Not only will you be impressed with its easy, secure operation, you'll be thrilled with how well the rubber coated stainless steel straps perfectly hug the roof racks on your car. Plus, with RockyMounts locks (sold separately) you can lock the rack to your vehicle and your bike to the rack.
The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.
Thule's Aero Foot Pack is a rock-solid rack solution that fits a huge range of vehicles without rain gutters and factory racks. The sleek-looking, aero design cuts down on wind resistance and noise. Easily installed without tools, the wide foot pads provide fantastic load distribution and maximum stability.
Saris’ Bones 3-Bike rack unites utilitarian strength and modern style. Crafted of incredibly strong, injection-molded plastic, the four arched leg mounts and two arched arms cradle your bikes on different levels to minimize unwanted handlebar and seat contact. Six highly adjustable straps, each equipped with soft, vinyl-coated hooks, hold the rack down, while the four legs have grippy rubber feet to provide a sturdy base that won't harm your vehicle's finish. Ratcheting, soft-touch, anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers. Plus, it folds fast for easy portability and storage.
Maximize your off-road exploring with Hollywood's Spare-Tire Rack! This smart rack carries 2 bikes, is fully adjustable to fit most rear spare tires, and boasts a rugged and simple strap design that holds fast and allows speedy installation and removal. Plus, the rack's support arms can be centered for off-center-mounted tires and folded down when not in use. The Spare Tire Rack comes fully assembled, too. - Distance between bike support arms: 13-inch - Distance between bike cradles: 7-inch - Maximum tire width 12-inch
Page 1 of 2 Next page